CCTV Discover JE-D7004 User Manual download pdf (Page 27)

4/8-channel H.264 DVR User Manual

Data bit: with the options of 5, 6, 7 and 8, 8 by default

Stop bit: with the options of 1 and 2, 1 by default

VERIFY: with the 5 options of None/Odd/Even/Mark/Space, None by default

Address : Complete the PTZ code of the corresponding channel.

Just set “protocol”, “baud rate” and “address code” in order to set the PTZ.

See “Shortcut Menu” →“PTZ Control” for PTZ control.

3.7.7 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced”, as shown below:

TYPE: with 3 options: static configuration, DHCP and PPPOE

Static : allocating an IP address manually

DHCP: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

system will establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated an IP address, which will be displayed on the

screen.

PPPOE: broadband dial-up network access, as shown below:

PPPOE user name and password: Fill in the PPPOE user name and password

provided by the Internet service provider.

When one ADSL line is connected to one DVR only, you can select Internet connection

in the PPPOE mode, when the ADSL modem will connect the DVR directly. Then press

“Enter” to select PPPOE in the connection mode to enter the PPPOE Setup screen.

After entering the broadband user name and password, click “Enter” and the system

will restart. After that, the DVR will establish a network connection in the PPPOE mode

automatically. After successful connection, the IP on the IP address will be modified to

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 47 48

No comments

CCTV Discover JE-D7004 User Manual Page 27