CCTV Discover JE-D7004 User Manual download pdf (Page 25)

4/8-channel H.264 DVR User Manual

activated for this area and a transparent block indicates motion detection is not

activated, as shown below:

Operating prompt:

Remote controller operation: Use “ “ (display mode) to select full screen or blank;

Mouse operation: Left-click the mouse and drag the motion box to set the area of

dynamic detection.

Motion detection setup procedures:

A. Turn “On” the corresponding channel in the “Channel Switch” option;

B. Set the sensitivity level as necessary, usually set at 3 or 4;

C. Set the motion area of the corresponding channel in the “Area Setup” option;

D. In the “Recording Mode” screen, set the corresponding channel to “On” in the

“Channel” option;

E. In the “Recording Mode” screen, select “Timing Recording” in the “Recording

Mode” option, also click “Record Time Configuration” to enter the Record Time

Configuration screen and set the corresponding time to alarm recording (see

timing recording in “Recording Mode” for the setup method).

After the setup has been done and motion detection triggered, a red letter “M” will

appear in the screen of this channel. See “Alarm processes” in Section 3.6.1 for alarm

processing.

3.7.4 Mobile phone monitoring

The mobile phone monitoring function of this series DVR is supported by mobile

phones of the Windows Mobile and Symbian operating systems, such as Dopod

P660, Nokia N78 and Nokia 95.

The operating procedures are as follows:

Setup method of mobile phone monitoring at the DVR end:

Enter the following screen from “Main Menu” →“Advanced Functions” →“Mobile Phone

Monitoring”:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

No comments

CCTV Discover JE-D7004 User Manual Page 25